+- Matrix Audio Community (https://www.matrix-digi.com/forums)
+-- 版块： Main Discussion（主讨论区） (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1)
+--- 版块： English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4)
+--- 主题： Mini-I Pro 3 Roon Ready (/showthread.php?tid=76)
Mini-I Pro 3 Roon Ready - Rolf - 10-14-2020
Hi!
Does anyone know when/if the Mini-I Pro 3 will get the Roon Ready status? As it is today my unit is severely crippled by the absence of full Roon functionality.
// Rolf
RE: Mini-I Pro 3 Roon Ready - Wei Cao - 10-14-2020
Hi Rolf.
Sorry for the inconvenience.
Roon is testing mini-i Pro 3 and mini-i 3 in the past days, hopefully the 2 models can get Roon certification soon.
Thanks for your understanding.
Cao
RE: Mini-I Pro 3 Roon Ready - High-End64 - 10-15-2020
Hi,
Me too!
I'm waiting for Roon ready certification because there is no other way to use the streamer with high/res files or mqa than using USB C connection.
This is very frustrating...
I hope Matrix will do all to accelerate this process.
Regards
Other question about steaming possibility for Mini I3 Pro.
There is the idea in the future to add the UPNP protocol?
RE: Mini-I Pro 3 Roon Ready - Wei Cao - 10-15-2020
(10-15-2020, 07:38 AM)High-End64 提到: Hi,
Me too!
I'm waiting for Roon ready certification because there is no other way to use the streamer with high/res files or mqa than using USB C connection.
This is very frustrating...
I hope Matrix will do all to accelerate this process.
Regards
Other question about steaming possibility for Mini I3 Pro.
There is the idea in the future to add the UPNP protocol?
Hi High-End 64,
Yes, Roon certification is the most important task for us right now.
Thanks for your patience.
RE: Mini-I Pro 3 Roon Ready - philoouu - 10-26-2020
@Cao Wei
Did you get some news about the Roon certification?
Thanks and Regards
RE: Mini-I Pro 3 Roon Ready - High-End64 - 10-29-2020
Hi to all,
Yesterday I downloaded a new firmware c113B4 and installed it on the Mini i3 Pro.
There is no notice on the Matrix site.
Also there is any info about the status of Roon certification.
Could someone give me any information?
There is in the future the possibility to add UPNP protocol to Mini I3 Pro?
Regards
RE: Mini-I Pro 3 Roon Ready - jazMirti - 10-30-2020
(10-29-2020, 12:59 PM)High-End64 提到: Hi to all,
Yesterday I downloaded a new firmware c113B4 and installed it on the Mini i3 Pro.
There is no notice on the Matrix site.
Also there is any info about the status of Roon certification.
Could someone give me any information?
There is in the future the possibility to add UPNP protocol to Mini I3 Pro?
Regards
Maybe that was the updated Roon software that also was sent to Roon for certification? If it gets certified there should be no need for another SW update. Correct me if I am wrong.
RE: Mini-I Pro 3 Roon Ready - philoouu - 11-07-2020
Hello
Any news on the certification?
RE: Mini-I Pro 3 Roon Ready - hogeun - 11-11-2020
Im so much concerned that my roon free trial is running out of time and still no update for roon certificate. Can you guys at least tell us about feedback or further schedule?
RE: Mini-I Pro 3 Roon Ready - Wei Cao - 11-11-2020
(11-11-2020, 05:05 AM)hogeun 提到: Im so much concerned that my roon free trial is running out of time and still no update for roon certificate. Can you guys at least tell us about feedback or further schedule?
lol so embarassing situation.
No probs, contact me later I can give you another trial code after we get the certification be done.
