What are the 3 USB ports of element S used for? How to use them? - 可打印的版本 +- Matrix Audio Community (https://www.matrix-digi.com/forums) +-- 版块: Quastions and Answers(常见问题) (https://www.matrix-digi.com/forums/forumdisplay.php?fid=6) +--- 版块: Q&A (English) (https://www.matrix-digi.com/forums/forumdisplay.php?fid=13) +---- 版块: Q&A About Hardwares (https://www.matrix-digi.com/forums/forumdisplay.php?fid=15) +---- 主题: What are the 3 USB ports of element S used for? How to use them? (/showthread.php?tid=499) |
What are the 3 USB ports of element S used for? How to use them? - Wei Cao - 04-28-2023 element S has 3 USB ports, a USB-A port, a USB-B port and a USB-C (Type C) port.
RE: What are the 3 USB ports of element S used for? How to use them? - Lars N. Clement - 04-22-2024 Hello Mr. Wei Cao, If I want to use USB-C and I set the Element S to "Streaming" and i have a Harddisk with Hi Res. Audio files in a Harddisk Docking station which has the interface USB-A (3.0). Can I use an adapter plug : USB-C (male) - USB-A (female) (see photo) in order to transfer the audio files over the Element S into the external DAC: Topping D90SE ? Or will I have to buy a new Harddisk Docking station with USB-C interface ? Are IIS-LVDS in the Element S, compatible with IIS-LVDS in the DAC; Topping D90SE ? (see photo) Regards Lars RE: What are the 3 USB ports of element S used for? How to use them? - LI HUI - 04-23-2024 (04-22-2024, 03:54 PM)Lars N. Clement 提到: Hello Mr. Wei Cao,Hi Lars, Yes, OTG adapters are OK, if you can buy a SSD with a native tyep C port, that would be better. Regarding the IIS connection, please refer to the #2 post in this thread. https://www.matrix-digi.com/forums/showthread.php?tid=400 best regards. Lihui RE: What are the 3 USB ports of element S used for? How to use them? - Lars N. Clement - 04-25-2024 Hello Lihui, Yes, it works with a USB-adapter. The Second problem is not solved and it will make the difference weather I chose to buy the Element S or not (I have borrowed it from a dealer). All he other connections works: Coax, AES, Optical, with sound. All the setup settings Wai Cao recommended for the DAC: Topping D90SE are followed and I have removed pin no, 16 from a HDMI cable, but no sound on IIS port! To be specific I have removed the pin in the cable that meets the pin no. 16 in the streamer AND the DAC just as shown on the photo from Wai Cao. In IIS mode on the DAC there are info about KHz, same as for AES, Optical or Coax ! Some info must pass through from Streamer to DAC on the IIS port. What about the device configuration in the Element S with regard to DAC: Topping D90SE ? As it is now: IIS-LVDS Port Definition : Type A, DSD output format from IIS LVDS port : Native MCLK mode from IIS LVDS port : Mode A Please, Do you have any suggestions ? Regards Lars RE: What are the 3 USB ports of element S used for? How to use them? - Lars N. Clement - 04-25-2024 Well, Luck follows the desperate ! Sometimes ! .......I reversed the ends on the HDMI cable on the two units - and the sound came then in high res. audio up to near max. DSD: 46, 128, 256 and Wav / FLAC up to 352.8 KHz....24 and 32 bit .....Problem solved ! Thanks Wai Cao and Lihui Lars |