帖子: 5
主题: 1
加入时间: Sep 2024
声望:
0
I have an XSPDIF-2 and I cannot get my XSP MQA to recognize it, whether it be through I2S, Coax, AES, etc. I have the drivers and I'm using windows 10 and when I plug in the XSPDIF2, my computer recognizes it and the matrix driver app shows the XSPDIF2. Furthermore, the light on the XSPDIF2 is green. However, I can't get my Matrix X-Sabre Pro MQA to connect to it. My DAC just keeps trying to connect but never does. when I use USB from my XSP to my computer, it works fine but for some reason the XSPDIF isn't working. Does anyone have any clue what is happening here?
帖子: 5
主题: 1
加入时间: Sep 2024
声望:
0
Is anyone able to comment on what is going on? I'd like to see if there is a fix before I resort to sending it in.
帖子: 1,058
主题: 109
加入时间: Sep 2024
声望:
36
When you connect the X-SPDIF 2 to your computer, is there red light come out from the optical output port?
Do you have some other S/PDIF output devices to test? For example a CD player or TV with optical / coaxial outputs.
帖子: 5
主题: 1
加入时间: Sep 2024
声望:
0
05-10-2022, 06:57 AM
(这个帖子最后修改于: 05-10-2022, 06:57 AM by Jonathan_1934.)
I have not tried SPDIF. I have tried with multiple DAC's. Nothing is output. Regardless, I don't think it's normal for any of the other outputs to not be working.
帖子: 1,058
主题: 109
加入时间: Sep 2024
声望:
36
Did you noticed is there red light come out from the optical port of X-SPDIF 2 (when you connect it to a computer)?
帖子: 5
主题: 1
加入时间: Sep 2024
声望:
0
No red light coming out of the optical port when connected to any computer.
帖子: 1,058
主题: 109
加入时间: Sep 2024
声望:
36
Hi Jonathan,
Your X-SPDIF 2 most likely defective now. Before we talk about what to do next, I hope you can do more test to confirm.
Connect it to your PC over USB, play a PCM 44.1kHz music file in foobar2000. In this case, if there is no red light come out from the optical port, we can confirm the X-SPDIF 2 is defective.
We must confirm the input sampling rate of the PCM signal is not higher than 192kHz, you can verify the sampling rate by your X-SABRE Pro. Because sampling rate higher than 192kHz also causes the optical port not output.
帖子: 5
主题: 1
加入时间: Sep 2024
声望:
0
I tested it, no light out of the optical port. What can I do to get this fixed?