帖子: 3
主题: 1
加入时间: Aug 2024
声望:
0
02-23-2023, 02:14 AM
Hey,
I'm trying to connect X-Sabre Pro (MQA) with Auralic Aries G2.1 as source.
Auralic doesn't have IIS, so i tried USB.
That did not work. X-Sabre was not recognized by Auralic.
Should USB connection be possible between the two?
What's the next best option if both IIS & USB are out of the question?
Sound quality is utmost priority.
Thanks.
帖子: 3
主题: 1
加入时间: Aug 2024
声望:
0
02-23-2023, 05:18 PM
(这个帖子最后修改于: 02-23-2023, 05:19 PM by Juhu.)
Thank you for your guidance.
I can confirm USB connection is indeed working with Aries G2.
帖子: 3
主题: 1
加入时间: Aug 2024
声望:
0
03-02-2023, 08:37 PM
(这个帖子最后修改于: 03-02-2023, 08:37 PM by Juhu.)
One additional question regarding the settings on Matrix X-SABRE Pro MQA.
Specifically "Dither" and "Dac mode" settings.
Are these aimed to fix the incoming signal if it's less-than-perfect ?
Witch settings should i use for best sound quality (assuming no problem with signal) ?
帖子: 1,058
主题: 109
加入时间: Aug 2024
声望:
36
Hi Juhu,
If the incoming signal is not good enough, which lead the X-SABRE Pro MQA cannot lock the signal sampling rate reliably, you can set the DPLL Bandwidth to High. (Which you can find in the settings menu of X-SABRE Pro MQA) It would help.
The DAC Mode means the DAC output a maximum volume and the volume is cannot be controled. This requires your speakers and amplifiers have volume control.
The option Dither is recommended to set to ON.