09-15-2023, 05:36 AM
Sorry Mandred,
The reason why I ask that question is, the device doesn't respond to the remote control, there are 2 possibilities.
1. The RM2 doesn't send IR signals. (the remote is dead)
2. The device (X-SABRe Pro) don't receive the signals. (The IR receiver of the device is dead)
So, we have a method to detect if the RM2 is sending IR command when you are pressing the buttons.
Open the camera app from a Android phone, please note, only Android phones has this function. Point the remote control to the phone camera, press the buttons of the remote. Observe the IR transmitter of the remote through the phone screen.
If the remote works, you'll see purple light come from the IR transmitter.
I hope the IR receiver of the device is good.
The X-SABRE Pro is not using RC5 standard IR commands, it's using provate commands all defined by Matrix, your phone app may not be able to compatible with the IR command of X-SABRE Pro. (From the 1st gen element device, Matrix Audio started to use RC5 IR commands, products that earlier than the element series, are unable to use Android app for IR remote control.)
The reason why I ask that question is, the device doesn't respond to the remote control, there are 2 possibilities.
1. The RM2 doesn't send IR signals. (the remote is dead)
2. The device (X-SABRe Pro) don't receive the signals. (The IR receiver of the device is dead)
So, we have a method to detect if the RM2 is sending IR command when you are pressing the buttons.
Open the camera app from a Android phone, please note, only Android phones has this function. Point the remote control to the phone camera, press the buttons of the remote. Observe the IR transmitter of the remote through the phone screen.
If the remote works, you'll see purple light come from the IR transmitter.
I hope the IR receiver of the device is good.
The X-SABRE Pro is not using RC5 standard IR commands, it's using provate commands all defined by Matrix, your phone app may not be able to compatible with the IR command of X-SABRE Pro. (From the 1st gen element device, Matrix Audio started to use RC5 IR commands, products that earlier than the element series, are unable to use Android app for IR remote control.)
