Mini i4 hmdi arc cec support

[William_3100]

Hoping someone has some experience with the mini i4 and a tv. I have connected hdmi arc to the unit. Audio passes through and volume control works as it should. The mini does not wake or go to standby with the tv. I am required to manually power on the min i4 and switch it to hdmi. Is that normal behavior for this device. All other hmd arc devices I own automatically power on or wake up when my TV is powered on. Most if not all devices usually automatically switch to hdmi when a tv plays audio.

will the tv ”wake up” the Matrix from standby when the tv is turned on ? How about if the Matrix was put in standby mode while HDMI was the selected input ?

also , since you have one ….. trying to figure out if a “trigger” can be made using the USB C port ( I did this with a Cambridge 851n that doesn’t have a trigger out ) ….. is the port powered while the unit is in standby ? An easy way to determine this is to plug an iPhone (or any mobile device) into the usb c port and see if it is charging while the Matrix is powered up , and then see if the phone is still charging when the Matrix is put into standby…..

thanks in advance ..