09-27-2021, 08:53 PM
(这个帖子最后修改于: 09-27-2021, 08:54 PM by Enrico_1425.)
Cao Wei,
Got the X-SABRE 3 replacement delivered today and after updating to Build44, all the bugs previously reported are fixed
The only bug still present is TIDAL Connect which still has a 4 secs gap between songs and it skip songs. This is for sure another bug that you guys need to fix with TIDAL as they way it's right now, TIDAL Connect is useless. I don't care about TIDAL Connect because I use mine with Roon, but I'm pretty sure other customers would be interested in this function.
1. Auto Sleep function from Roon works most of the time but not always.
R: FIXED with Build44
2. TIDAL Connect have a gap between songs of 4 secs when skipping tracks. It takes 4 secs for any song to start playing. Meaning there is no gapless playback
R: NOT FIXED. Bluesound devices had this same issue for months and got fixed back in June with the latest firmware.
3. When playing Tidal Connect, once pause then play again there will be a short fade in occur.
R: FIXED with Build44
4. Playing MQA, when pausing a MQA song, then replay, the song starts for about 1 sec, then stops then starts again with a fade in. All MQA songs start with a fade in, no matter if there is no change in sampling rate.
R: FIXED with Build44
5. If X-SABRE 3 is on Standby and start playing a song from Roon, will get “Failed to open the Audio Device” error message on Roon. Pressing play twice makes the error message go away.
R: FIXED with Build44
6. When playing with Roon DSD files at 2.8 or 11.2, no matter the sampling rate, if pause the song, as soon I press play again, there is a loud POP coming out of the speakers.
R: FIXED with Build44
7.- PCM (FLAC) songs get cut by about 100ms to 250ms at the beginning of the song. This only happens with some songs, not all of them and mostly with songs from Qobuz.
R: FIXED with Build44
So basically all the bugs concerning Roon have been fixed with the new firmware. Also, I can confirm that the whirring noise reported by other owners is also present in my unit but it's only audible if I place my ear literally at less than 1" from the X-SABRE 3.
Good Job, Matrix Audio Team!!!
Got the X-SABRE 3 replacement delivered today and after updating to Build44, all the bugs previously reported are fixed
![Smile Smile](https://www.matrix-digi.com/forums/images/smilies/smile.png)
1. Auto Sleep function from Roon works most of the time but not always.
R: FIXED with Build44
2. TIDAL Connect have a gap between songs of 4 secs when skipping tracks. It takes 4 secs for any song to start playing. Meaning there is no gapless playback
R: NOT FIXED. Bluesound devices had this same issue for months and got fixed back in June with the latest firmware.
3. When playing Tidal Connect, once pause then play again there will be a short fade in occur.
R: FIXED with Build44
4. Playing MQA, when pausing a MQA song, then replay, the song starts for about 1 sec, then stops then starts again with a fade in. All MQA songs start with a fade in, no matter if there is no change in sampling rate.
R: FIXED with Build44
5. If X-SABRE 3 is on Standby and start playing a song from Roon, will get “Failed to open the Audio Device” error message on Roon. Pressing play twice makes the error message go away.
R: FIXED with Build44
6. When playing with Roon DSD files at 2.8 or 11.2, no matter the sampling rate, if pause the song, as soon I press play again, there is a loud POP coming out of the speakers.
R: FIXED with Build44
7.- PCM (FLAC) songs get cut by about 100ms to 250ms at the beginning of the song. This only happens with some songs, not all of them and mostly with songs from Qobuz.
R: FIXED with Build44
So basically all the bugs concerning Roon have been fixed with the new firmware. Also, I can confirm that the whirring noise reported by other owners is also present in my unit but it's only audible if I place my ear literally at less than 1" from the X-SABRE 3.
Good Job, Matrix Audio Team!!!