(08-23-2021, 04:52 AM)Cao Wei 提到: Hi John,Thanks for your reply, Mr. Wei. Yes, the other post that you mention is mine. I had forgotten my login info, so I re-registered.
I assume that the other thread regarding X-SPDIF 2 and Topping D90 is also yours.
What cable are you using for IIS connection? A regular HDMI cable? Is there any jumper on that cable?
It may also due to the IIS configuration of X-SPDIF 2 and D90, a customer of ours feedback to us, he is using a X-SPDIF 2 with his Topping D90. He set all the DIP switches on the bottom of X-SPDIF 2 to OFF, and factory reset the D90, they worked.
Please note, we have no chance to test this combination by ourselves yet, the information above is just a reference from a customer.
Can you follow his instructions and have a try?
I'm using a Rocketfish consumer HDMI cable, and it doesn't have any jumper on the cable. The switches on my X-SPDIF 2 are off. I will try the factory reset.
By the way, I'm using AES/EBU connection with the X-SPDIF 2. It defaults at 44.1kHz on the screen.
I've tried the factory reset with the Matrix switches off, and no sound from IIs. I've seen from another forum post about this same IIs and D90 issue, that the 2 devices are not compatible with each other through the IIs interface. That answer came from the Matrix Audio engineer that designed it.
