帖子: 11
主题: 0
加入时间: Aug 2024
声望:
0
Good day!
I update firmware it to v1.0.4 Build003. Now testing.
DAC don't turn off laptop. Turn off laptop because the battery is dead, and the mains was not connected. But USB cable was connected.
May be DAC tried to interrogate laptop?
帖子: 11
主题: 0
加入时间: Aug 2024
声望:
0
I update firmware to latest version.
Besides, replaced optical cable another.
But still, periodically, when playing a track, on display may appear - "No signal".
What else can be done?
帖子: 11
主题: 0
加入时间: Aug 2024
声望:
0
Good day! Ок.
I forgot to write - The sound doesn't disappear. Only a message
But on old firmware it wasn't. Why?
帖子: 11
主题: 0
加入时间: Aug 2024
声望:
0
Good day!
I set the DPLL bandwidth to "High", but still on display appears and disappears quickly No signal.
The sound doesn't disappear.
What still can be done?
帖子: 11
主题: 0
加入时间: Aug 2024
声望:
0
Good day!
Enabled in settings Wi-Fi, maybe a message "No signal" its from Wi-Fi?
Maybe fix it,?
帖子: 1,058
主题: 109
加入时间: Aug 2024
声望:
36
Hi SVF,
The message "No signal" means no audio signal from the phisical audio input ports or from network streaming. It's not talking about Wi-Fi or Ethernet connection.
In this case, can you provide the following details and do the following tests?
1. When the issue happens, how long will the text "No signal" lasts on the display?
2. What CD transport (model) are you using?
3. Does the CD transport have a coaxial output? Are you able to test it with coaxial cable connection?
4. Do you have some other optical output device to test with your Matrix device? If the messages will appear when playing in this case?
帖子: 11
主题: 0
加入时间: Aug 2024
声望:
0
01-30-2023, 08:23 AM
(这个帖子最后修改于: 02-02-2023, 02:39 PM by SVF_2288.)
Good day!
1. Issue happens by listening to CD. The text "No signal" lasts on the display 1 second.
The sound doesn't disappear.
2. Transport : YBA CDT450 passion and CD NAD M5. Happens here and there.
3. Yes CD transport have coaxial output. Yes, I test with coaxial cable.
4. Yes, as written above, test on YBA CDT450 passion and CD NAD M5.
5. Besides, I test other optical cable.
6 This issue appeared after firmware update.
帖子: 11
主题: 0
加入时间: Aug 2024
声望:
0
02-12-2023, 10:33 AM
(这个帖子最后修改于: 02-12-2023, 10:39 AM by SVF_2288.)
Good day!
I tested coaxial cable connection - message also appears.
But only now message "No audio input". And at optical cable connection also "No audio input".
This issue appeared after firmware update.