帖子: 9
主题: 0
加入时间: Aug 2024
声望:
0
07-02-2024, 04:58 PM
(这个帖子最后修改于: 07-02-2024, 05:02 PM by Dmitry_3834.
编辑原因: add firmware info
)
(06-18-2024, 07:12 AM)LI HUI 提到: (06-18-2024, 06:39 AM)Dmitry_3834 提到: For my audio system I use a power distributor with EMI filters. Matrix mini-i 4 is connected to a separate power filter output. Hi Dmitry,
Can you connect your mini-i 4 to the power mains directly, and then take a note will the issue happen again. The error occurred again twice. In the same sequence as before:
1. Pressed the Standby button on the remote control;
2. The text "Standby..." was displayed and the display turned off;
3. The relay clicked;
4. The display turned on again with the text "SETTINGS SAVED";
5. Then after a second the error codes were displayed.
I rebooted the device by long pressing the power button. The device turned on... I pressed the standby button on the remote control again... And again the error codes appeared as in the first example, but this time without step 4. After the second reboot, the device turned off normally. It is not yet possible to understand after what actions this happens. ![Sad Sad](https://www.matrix-digi.com/forums/images/smilies/sad.png)
Firmware version:V1.0.9 Build005
帖子: 60
主题: 0
加入时间: Aug 2024
声望:
1
(07-02-2024, 04:58 PM)Dmitry_3834 提到: I rebooted the device by long pressing the power button. The device turned on... I pressed the standby button on the remote control again... And again the error codes appeared as in the first example, but this time without step 4. After the second reboot, the device turned off normally. It is not yet possible to understand after what actions this happens. ![Sad Sad](https://www.matrix-digi.com/forums/images/smilies/sad.png)
Firmware version:V1.0.9 Build005
Hi Dmitry,
Long pressing the power button will not reboot the device, you need to remove the power cable from the device and plug back to let the device to reboot.
Will it work?
帖子: 60
主题: 0
加入时间: Aug 2024
声望:
1
(06-29-2024, 02:59 PM)ExUnoPlura 提到: (1) After power outage when in standby, the mini-i 4 Pro requires power plug to be removed and reinserted in order to discover network again.
(2) I tested a 768 kHz / 24 bit sample file on Roon and MA Remote. On Roon, the maximum sample rate is 384 kHz in device setup and the file is downsampled to 384 kHz. On MA Remote, the file shows as 768 kHz but also shows as 32 bit.
Hi,
1. I don't understand your question, can you describe it with more details?
2. The sampling rate lomit of mini-i Pro 4 when playing from Roon through Wi-Fi is 384k, through LAN connection, it will be 768kHz. When playing a 768kHz track from MA Remote app, it displays 32bit, it might be a display issue.
帖子: 9
主题: 0
加入时间: Aug 2024
声望:
0
(07-04-2024, 06:08 AM)Sandy 提到: (07-02-2024, 04:58 PM)Dmitry_3834 提到: I rebooted the device by long pressing the power button. The device turned on... I pressed the standby button on the remote control again... And again the error codes appeared as in the first example, but this time without step 4. After the second reboot, the device turned off normally. It is not yet possible to understand after what actions this happens. ![Sad Sad](https://www.matrix-digi.com/forums/images/smilies/sad.png)
Firmware version:V1.0.9 Build005
Hi Dmitry,
Long pressing the power button will not reboot the device, you need to remove the power cable from the device and plug back to let the device to reboot.
Will it work? The device does not respond to commands when error codes appear. Rebooting by long pressing the hardware button on the device body (about 10 seconds) works in this case. But it does not matter. Errors appear randomly only when the device goes into standby mode after playing music. I noticed that in all cases, large DSD files ranging from 300 to 2000 megabytes were played before the errors. Perhaps these are some problems with caching in RAM memory or something similar. It would be good to know what these error codes mean (E009, E010, E011, E012, E013, E014, E015) in order to understand how to test the device.
帖子: 60
主题: 0
加入时间: Aug 2024
声望:
1
(07-04-2024, 09:09 AM)Dmitry_3834 提到: The device does not respond to commands when error codes appear. Rebooting by long pressing the hardware button on the device body (about 10 seconds) works in this case. But it does not matter. Errors appear randomly only when the device goes into standby mode after playing music. I noticed that in all cases, large DSD files ranging from 300 to 2000 megabytes were played before the errors. Perhaps these are some problems with caching in RAM memory or something similar. It would be good to know what these error codes mean (E009, E010, E011, E012, E013, E014, E015) in order to understand how to test the device.
Hi,
Are these issues happen frequently? Can you enter the settings menu and upload the logs from the last option "Tech support"?
After the logs uploaded, please send the serial number of your device to me via forum PM. Thank you.
帖子: 9
主题: 0
加入时间: Aug 2024
声望:
0
(07-04-2024, 09:37 AM)Sandy 提到: (07-04-2024, 09:09 AM)Dmitry_3834 提到: The device does not respond to commands when error codes appear. Rebooting by long pressing the hardware button on the device body (about 10 seconds) works in this case. But it does not matter. Errors appear randomly only when the device goes into standby mode after playing music. I noticed that in all cases, large DSD files ranging from 300 to 2000 megabytes were played before the errors. Perhaps these are some problems with caching in RAM memory or something similar. It would be good to know what these error codes mean (E009, E010, E011, E012, E013, E014, E015) in order to understand how to test the device.
Hi,
Are these issues happen frequently? Can you enter the settings menu and upload the logs from the last option "Tech support"?
After the logs uploaded, please send the serial number of your device to me via forum PM. Thank you. Since May 23, 5 similar errors have occurred. I sent the logs through the device menu. Please enable PM in your profile, I can't send you a message.
帖子: 60
主题: 0
加入时间: Aug 2024
声望:
1
(07-04-2024, 03:27 PM)Dmitry_3834 提到: (07-04-2024, 09:37 AM)Sandy 提到: (07-04-2024, 09:09 AM)Dmitry_3834 提到: The device does not respond to commands when error codes appear. Rebooting by long pressing the hardware button on the device body (about 10 seconds) works in this case. But it does not matter. Errors appear randomly only when the device goes into standby mode after playing music. I noticed that in all cases, large DSD files ranging from 300 to 2000 megabytes were played before the errors. Perhaps these are some problems with caching in RAM memory or something similar. It would be good to know what these error codes mean (E009, E010, E011, E012, E013, E014, E015) in order to understand how to test the device.
Hi,
Are these issues happen frequently? Can you enter the settings menu and upload the logs from the last option "Tech support"?
After the logs uploaded, please send the serial number of your device to me via forum PM. Thank you. Since May 23, 5 similar errors have occurred. I sent the logs through the device menu. Please enable PM in your profile, I can't send you a message. Hi Dmitry,
I'm so sorry, my PM works now, please send it again.
帖子: 9
主题: 0
加入时间: Aug 2024
声望:
0
(07-05-2024, 01:37 AM)Sandy 提到: I'm so sorry, my PM works now, please send it again. Hi Sandy. Did you find my device logs by serial number? I recently sent you a PM.
帖子: 60
主题: 0
加入时间: Aug 2024
声望:
1
07-12-2024, 02:25 AM
(这个帖子最后修改于: 07-12-2024, 02:25 AM by Sandy.)
(07-07-2024, 03:01 PM)Dmitry_3834 提到: (07-05-2024, 01:37 AM)Sandy 提到: I'm so sorry, my PM works now, please send it again. Hi Sandy. Did you find my device logs by serial number? I recently sent you a PM.
Hi Dmitry,
I have replied to your PM on July 8, please check it out~
Best regards.
|